#header-inner img {margin: 0 auto !important;} #header-inner {text-align:center !important;}

Sunday 28 December 2014

Assembling plastics

Hi all, with the Christmas Holidays upon us I suspect there could be a lot of people putting together their first plastic sets for Bolt Action (And any other game for that matter). As such I thought I'd share a few thoughts I have on the subject.










  1.  Proper tools. Glue Glue Glue Glue Glue. I build probably thousands of figures over the course of a year and have learned that a pair of side cutters, a good knife and some plastic solvent glue are the most important tools around. My recommendation is this Plastic Weld. It creates a very solid join, and applying a little with an old paint brush to each bonding surface melts the plastic a little and gives you lots of play with the posing before it fully dries.Humbrol and other modelling glues are similar, but not as good as a pure solvent. If you don't have some, get some. When bonding plastic to metal you want Superglue. Superglue for plastic to plastic will cause you endless frustration and irritation. Did I mention using proper plastic glue? No? Get some. 
  2.  Proper tools. A pair of side cutters are cheap, here's an example of lots of types of Side cutters. The allow you to get the part off the sprue and without warping or bending the part in the process. When working on smaller parts like tools or pouches, I hold onto the part and clip the surrounding sprue away away along with the part still attached. This makes it far easier to trip the part without loosing it in the process.
  3. Proper tools!!!! A decent modelling scalpel is another must have. They are also cheap, and are fantastic for getting rid of mould lines and sprue connecting joints. 

There are other tools you can use, but to be honest these are the only ones I generally touch. I do have a pin vice for drilling small parts like aerials and gun barrels, and also  some wet and dry sand paper in a few different grains for particularly stubborn sanding areas, though for the purpose of building figures these aren't so important.

When putting plastic figures together don't get hung up on thinking that parts have to go specifically with a body or that two arms always always have to go together. What I tend to do, especially on sets of figures with a variety of arms is just play around and see what works aesthetically for me. It's worth using the position of the feet as a guide to getting the figure to look natural. The feet pointing one way and the arms and head pointing in different directions tends to look subtly wrong to the eye and can be somewhat dissatisfying.

It's worth assembling the model with a weapon in the hand that bears the full weight of the firearm. This allows you to set the weapon in place in a natural position, and then you can adjust the steadying arm around the rifle. That way the model retains a natural pose and you don't have to bend the weapon in to fit. If you don't want to attach the weapon before painting you can still do this, but not glue the weapon into their hands. Using the glue I suggest gives you the time to play around with the model .

Soldiers in the Second World War were trained to move either with their weapon at the port or trail positions, In the picture to the left are 3 Germans, the one on the far left is carrying his rifle at the trail, whilst the other two are carrying theirs at the port, so having your figures posed in this way can give your force a nice and subtley period look. 





When posing your firing figures try to keep them with the weapon tight to their body with the weapon tucked into their shoulders. I'm not a fan of figures running and firing simultaneously, so tend to save these for figures with their legs suitably braced or kneeling. 











The beauty of plastics is it's very easy to do conversions without having to resort to extensive work. The SS Officer here was built using a Warlord Plastic Blitzkrieg figure as a base, and then had a head taken from their late war German set. The smock was sculpted on using White Milliput. 













The loader in the Japanese LMG team was built straight from the box, with not chopping around required, I simply used one of the arms used for carrying a rifle at the trail position to make him appear to be changing magazines on the weapon.








This late war Waffen SS squad features a 3 man LMG team from Artizan Designs, and all the other figures are from Warlord Games Late War German Infantry. The NCO has had a metal head added from the Warlord range, however all the others are straight from the box.


I hope this is helpful, and provides some inspiration to building your own plastics. You can see more of my work at my painting page here at Volley Fire Painting and you can read my reviews and articles at http://volleyfirepainting.blogspot.co.uk/. Happy New Year!

Andy








2 comments: